!!! Для тех, кто знает и делает сам

!!! Для тех, кто знает и делает самостоятельно !!!
————————————————————————————————————————————————————————————————————
Адрес KMS нужно выставлять 127.0.0.2 (а не 127.0.0.1 и не localhost)
————————————————————————————————————————————————————————————————————


Первичная установка Office
——————————————————————————
1. Запустите KMSmicro и произведите синхронизацию времени (T)
2. Импортируйте в реестр необходимые данные. Дважды щелкните по файлу:
Office2010-Localhost.reg в случае установки Office 2010;
Office2013-Win7-Localhost.reg в случае установки Office 2013 на Windows 7;
Office2013-Win8-Localhost.reg в случае установки Office 2013 на Windows 8.
3. Установите Office|Visio|Project VL.
4. Запустите приложение и проверьте статус активации. Если вдруг увидите, что требует активации, закройте приложение, подождите 1-2 минуты
и проверьте статус активации еще раз.
Редко, но такое бывает. Обычно продукт активируется сразу после установки
5. Закройте KMSmicro (S)

Активация уже установленного Office
———————————————————————————————————
1. Запустите KMSmicro и произведите синхронизацию времени (T)
2. Запустите один из следующих cmd-файлов от имени Adminstrator:
Office 2010 Activate.bat Office 2010-x32 & Windows-x32 или Office 2010-x64 & Windows-x64
Office 2010 (w64-o32) Activate.bat Office 2010-x32 & Windows-x64
Office 2013 Activate.bat Office 2013-x32 & Windows-x32 или Office 2013-x64 & Windows-x64
Office 2013 (w64-o32) Activate.bat Office 2013-x32 & Windows-x64.
3. Если в конце выполнения увидели «», продукт активирован/активация продлена.
4. Закройте KMSmicro (S)

Если активация не проходит
———————————————————————————————————
1. Вы пытаетесь активировать Retail версию продукта
2. Стенка/антивирус блокируют обмен
3. Истек счетчик уникальных запросов активации . Проверьте состояние вводом 10 для Office 2010 или 13 для Office 2013.
Значение «Current count» должно быть не меньше 4. Если вы увидели меньшее значение, значит счетчики надо накручивать.
Но это совсем другая история!

Resultados (inglés) 1:

!!! For those who know and make yourself!!!————————————————————————————————————————————————————————————————————Address of the KMS must exhibit 127.0.0.2 (rather than 127.0.0.1 or localhost)————————————————————————————————————————————————————————————————————The primary Office installation——————————————————————————1. run KMSmicro and synchronize time (T)2. import the data into the registry. Double-click on the file: Office2010-Localhost.reg in the case of an installation of Office 2010. Office2013-Win7-Localhost.reg if you install Office 2013 on Windows 7; Office2013-Win8-Localhost.reg if you install Office on Windows 8 2013.3. install Office |Visio |Project VL.4. run the application and verify the activation status. If you suddenly see that requires activation, close the application, please wait 1-2 minutes and check activation status once again. Rarely, but it happens. Typically, the product is activated immediately after installation5. close KMSmicro (S)Activating an already installed Office———————————————————————————————————1. run KMSmicro and synchronize time (T)2. run the following cmd files on behalf of Adminstrator had: Office 2010 Office 2010 Activate.bat-x 32 and Windows Office 2010 x 32 or x 64 & Windows-x 64 Office 2010 (w64-o32) Activate.bat Office 2010-x 32 & x 64 Windows Office 2013 Activate.bat Office 2013-x 32 x 32 or Windows & Office 2013-x 64 & Windows-x 64 Office 2013 (w64-o32) Activate.bat Office 2013-x 32 & x 64 Windows.3. If at the end of the saw ""the product is activated/activation is prolonged.4. close KMSmicro (S)If activation fails———————————————————————————————————1. you are trying to activate a Retail version of the product2. Panel/antivirus blocking Exchange3. the unique count of activation requests Expired. Check the status of the input 10 for Office 2010 or Office 2013 13. The Current count value must be not less than 4. If you saw a lower value, then we should cheat counters. But that's another story altogether!

Resultados (inglés) 2:

!!! For those who know and do yourself KMS need to put 127.0.0.2 (instead of 127.0.0.1 and not installing Office -------------------------- 1. Start KMSmicro and make time synchronization (T) 2. Import the registry necessary data. Double-click on file: Office2010-Localhost.reg if you install Office 2010; Office2013-Win7-Localhost.reg installing Office 2013 on Windows 7; Office2013-Win8-Localhost.reg installing Office 2013 on Windows 8. 3. Install Office | visio | Project VL. 4. Run the application and check the status of activation. If you suddenly see that require activation, close the application, wait 1-2 minutes and check the status of the activation again. Rare, but it happens. Typically, the product is activated immediately after installation 5 . Close KMSmicro (S) Activation already installed Start KMSmicro and make time synchronization (T) 2. Run one of the following cmd-file on behalf Adminstrator: Office 2010 Activate.bat Office 2010-x32 & Windows-x32 or Office 2010-x64 & x64 Windows- Office 2010 (w64-o32 ) Activate.bat Office 2010 & Windows-x32-x64 Office 2013 Activate.bat Office 2013-x32 & Windows-x32 or Office 2013-x64 & x64 Windows- Office 2013 (w64-o32) Activate.bat Office 2013-x32 & Windows -x64. 3. If the end of a saw "


























"The product is activated / prolonged activation.
4. Close KMSmicro (S) If the activation is not You are trying to activate the Retail version of the product 2. Wall / antivirus block exchange 3. Expired meter unique activation requests. Check the status of input 10 for Office 2010 or Office 13 to 2013. Meaning «Current count» must be at least 4. If you see a lower value, then the counters need to cheat. But that's another story!

Resultados (inglés) 3:

! !! For those who know and independent manufacturing! !!

in some 127.0.0.2 KMS to display the address (not 127.0.0.1 not localhost)
In some




1 -------------------------- original installation Office. KMSmicro synchronous operation time (T) and dial the telephone
2.Input the necessary data in the registry. Double click the file Office2010-Localhost.reg:
in the installation of Office 2010
Office2013-Win7-Localhost.reg; if in the Windows 7 installation Office 2013;
Office2013-Win8-Localhost.reg when installing Office 2013 on Windows 8
3.| install Office Visio Project VL |.
4. Run the application state of activation and check. If you will find all of a sudden need for activation, close the application, wait 1-2 minutes and examine the state of a

little activation,However, this situation is common. Usually the product is activated immediately after installing
5. Close your KMSmicro

(S) activation has been designated Office
-----------------------------------
1. KMSmicro synchronous operation time (T) and dial the telephone
2.Run the following a representative Adminstrator CMD file:
Office 2010 Activate.bat Office 2010 - X32 / Windows or Office 2010 - x64 / X32 Windows x64
Office in 2010 (which is O32) Activate.bat Office 2010 - X32 / Windows x64
Office 2013 Activate.bat Office 2013 - X32 / Windows or Office 2013 X32 - x64 / Windows x64
Office 2013 (this is the Activate O32).BAT Office 2013 - Windows x64 X32 *.
3. If late in the discharge see ">" < product activation success, to extend the product activation / activation.
4. Close your KMSmicro (S)



----------------------------------- if not through 1 activation.You try to activate the retail version of the product
2. The wall / antiviral blocking exchange
3. A unique activation has expired the query table. Please check the input or the state of Office in 2010 to Office 2013
1013."Contemporary significance should not be less than 4 count. If you see the counter smaller values, meant to be out of control.

but that's a whole other story!